![]() ![]() We would recommend that you contact an IT Professional or you can also go to Port Translation Please Note: If you require further assistance with port forwarding Tyco Technical Support cannot assist with any router or firewall programming. Please refer to the manufacture of the firewall for more information on how to do so. If you do have any firewalls that reside on the computer you are using for DLS you would also want to make sure that port 51004 or 3062 depending on the communicator is also not being blocked by it. ![]() Port Number = The Port number the communicator is trying to transmit data on (Default for an SMS/ connection is 51004, and 3062 for T-Link communicators) IP Address = The static internal IP address of your DLS computer The most common information required would be the following but can vary depending on the router/firewall being used: Once your DLS computer has been set with a Static IP address you would then want to go into your router/firewall’s configuration and forward your port for the connection type that you are using. It is first recommended that the computer you are using for DLS connection have a Static IP address as to avoid any conflicts that could arise when using a Dynamic IP (DHCP). When you are communicating over an SMS connection type or through a T-Link communicator it may be required to enable port forwarding on any routers or firewalls in order the pass the information along from the panel to the DLS computer. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |